12.07.2015 Views

Configuration Handbook - Kamami.pl

Configuration Handbook - Kamami.pl

Configuration Handbook - Kamami.pl

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

IntroductionAll configuration schemes use either an intelligent host or a configurationdevice(s) (Table 1–2).Table 1–2. <strong>Configuration</strong> Schemes<strong>Configuration</strong> SchemeTypical UsePassive Serial (PS)<strong>Configuration</strong> with the enhanced configuration devices (EPC16, EPC8,and EPC4), EPC2, EPC1, EPC1441 configuration devices, serialsynchronous microprocessor interface, the USB Blaster USB PortDownload Cable, MasterBlaster TM communications cable, ByteBlaster TM IIparallel download cable or ByteBlasterMV TM parallel port download cable.Active Serial (AS)<strong>Configuration</strong> with the serial configuration devices (EPCS1 and EPCS4).Passive Parallel Synchronous (PPS) <strong>Configuration</strong> with a parallel synchronous microprocessor interface.Fast Passive Parallel (FPP) <strong>Configuration</strong> with an enhanced configuration device or parallelsynchronous microprocessor interface where 8 bits of configuration dataare loaded on every clock cycle. Eight times faster than PPS.Passive Parallel Asynchronous(PPA)Passive Serial Asynchronous (PSA)<strong>Configuration</strong> with a parallel asynchronous microprocessor interface. Inthis scheme, the microprocessor treats the target device as memory.<strong>Configuration</strong> with a serial asynchronous microprocessor interface.Joint Test Action Group (JTAG) <strong>Configuration</strong> through the IEEE Std. 1149.1 (JTAG) pins. (1)The following chapters discuss how to configure one or more Stratixseries, Cyclone series, APEX II, APEX 20K (including APEX 20KE andAPEX 20KC), Mercury, ACEX 1K, FLEX 10K (including FLEX 10KE andFLEX 10KA), and FLEX 6000 devices. The following chapters should beused in conjunction with the following documents:■■■■■■■■■■■■■Stratix II Device <strong>Handbook</strong>Stratix Device <strong>Handbook</strong>Stratix GX FPGA Family Data SheetCyclone II Device <strong>Handbook</strong>Cyclone Device <strong>Handbook</strong>APEX II Programmable Logic Device Family Data SheetAPEX 20K Programmable Logic Device Family Data SheetAPEX 20KC Programmable Logic Device Data SheetMercury Programmable Logic Device Family Data SheetACEX 1K Programmable Logic Device Family Data SheetFLEX 10K Embedded Programmable Logic Family Data SheetFLEX 10KE Embedded Programmable Logic Family Data SheetFLEX 6000 Programmable Logic Device Family Data SheetVolume I covers how to configure Altera FPGAs, where each chaptercovers a different device family. Each subsection describes how toconfigure the devices with the following configuration schemes:1–2 Altera Corporation<strong>Configuration</strong> <strong>Handbook</strong>, Volume 1 August 2005

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!