ARM Cortex-A15 MPCore Processor Technical Reference Manual

Program Trace Macrocell31 4 3 2 0ReservedPower up requestReservedBits Name Function[31:4] - Reserved.Table 12-14 shows the ETMPDCR bit assignments.Figure 12-11 ETMPDCR bit assignmentsTable 12-14 ETMPDCR bit assignments[3] Power up request Core power up request bit. This bit enables a request to the power controller to power up the core,enabling access to the trace registers in the core power domain:0 = DBGPWRUPREQ is LOW. This is the reset value.1 = DBGPWRUPREQ is HIGH.[2:0] - Reserved.12.7.12 Miscellaneous Output RegisterThe ITMISCOUT characteristics are:PurposeControls signal outputs when bit[0] of the ETMITCTRL is set. SeeIntegration Mode Control Register on page 12-30.Usage constraints There are no usage constraints.ConfigurationsAvailable in all PTM configurations.Attributes See the register summary in Table 12-4 on page 12-11.Figure 12-12 shows the ITMISCOUT bit assignments.31 10 9 8 70ReservedReservedPTMEXTOUT[1:0]Figure 12-12 ITMISCOUT bit assignmentsTable 12-15 shows the ITMISCOUT bit assignments.Table 12-15 ITMISCOUT bit assignmentsBits Name Function[31:10] - Reserved[9:8] PTMEXTOUT[1:0] Drives the PTMEXTOUT[1:0] outputs[7:0] - ReservedARM DDI 0438I Copyright © 2011-2013 ARM. All rights reserved. 12-25ID062913Non-Confidential