R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Instrument Functions
PAGE UP |
PAGE DOWN
Remote command: CAL:RES?
Analyzer Mode
The softkeys PAGE UP and PAGE DOWN scroll one page forward or backward in
the CALIBRATION RESULTS table. They have no function when the table is closed.
Remote command: --
4.5.10 Markers and Delta Markers – MKR Key
The markers are used for marking points on traces, reading out measurement
results and for quickly selecting a display section. R&S FSQ provides four markers
per display window. All markers can be used either as markers or delta markers.
The availability of marker functions depends on whether the measurement is performed
in the frequency, time or level domain.
The marker that you can move is defined in the following as the active marker.
marker active marker temporary marker
1 3 T1
2
delta marker
Fig. 4.7 Examples of marker display
Temporary markers are used in addition to the markers and delta markers to evaluate
the measurement results. They disappear when the associated function is deactivated.
The measurement results of the active marker (also called marker values) are displayed
in the marker field. The marker info field at the upper right of the display
shows the marker location (here, frequency), the level and the currently selected
trace [T1].
4.54 Operating Manual 1313.9681.12 - 01