R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Instrument Functions
INS BEFORE
RANGE
INS AFTER
RANGE
DELETE
RANGE
Inserts a range to the left of the current range / column of the sweep list.
Remote command: ESP:RANG1:INS:BEF
Inserts a range to the right of the current range / column of the sweep list.
Remote command: ESP:RANG1:INS:AFT
Analyzer Mode
Deletes the current range / column from the sweep list. All ranges above the deleted
one are adjusted by one (e.g. Range 6 turns to Range 5).
Remote command: ESP:RANG:DEL
NEXT RANGES Scrolls through the sweep list in forward direction if more than 5 ranges are defined.
The first page shows Range 1 through 5, the second page shows Range 6 to 11 etc.
PREVIOUS
RANGES
REFERENCE
RANGE
POW REF
CHAN PEAK
TX
BANDWIDTH
RRC FILT
(ON OFF)
Scrolls through the sweep list in backwards direction if more than 5 ranges are
defined. The first page shows Range 1 through 5, the second page shows Range 6
to 11 etc.
Opens a submenu to define additional parameters for the reference power measurement.
POW REF CHAN PEAK
TX BANDWIDTH
RRC FILT (ON OFF)
ALPHA BT
Selects the type of power measurement in the reference range.
• Peak
Measures the highest peak within the reference range.
• Chan
Measures the channel power within the reference range (integral bandwidth
method).
Remote command: ESP:RTYP PEAK
Defines the bandwidth used for measuring the channel power. Possible values are
from 20 Hz to the span of the reference range.
Remote command: ESP:BWID 20 HZ
Activates or deactivates the RRC filter.
Remote command: ESP:FILT:RRC:STAT ON
ALPHA BT Sets the rolloff factor of the RRC filter.
Remote command: ESP:FILT:RRC:ALPH 0.22
4.150 Operating Manual 1313.9681.12 - 01