R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Instrument Functions
FILE
Basic Settings
• Functions for management of storage media (FILE MANAGER). Included are
among others functions for listing files, formatting storage media, copying, and
deleting/renaming files.
It is possible to load data sets stored with another instrument of the same analyzer
family. However, keep the following restrictions in mind:
• The frequency range of the loading instrument must include the range of the
instrument used to store the data set.
Example: A R&S FSQ40 can load a data set, saved with a R&S FSQ26 but a
R&S FSQ8 can not load a data set saved with a R&S FSQ26. A R&S FSQ with
a frequency range of at least 26 GHz is required.
• An instrument with an additional option can load a data set saved with an
instrument without this option, but not the other way round.
Example: A FSQ 8 with option R&S FSQ-B17 can load a data set, saved with a
R&S FSQ8 without this option but not the other way round.
The R&S FSQ is capable of internally storing complete instrument settings with
instrument configurations and measurement data in the form of data sets. The
respective data are stored on the internal hard disk or, if selected, on a memory stick
or on a flash disk. The hard disk and flash disk drives have the following names:
flash disk F:, hard disk D: (hard disk C: is reserved for instrument software)
SAVE | RECALL� SAVE FILE
STARTUP RECALL
RECALL FILE
SELECT PATH
SELECT FILE
EDIT FILE NAME
EDIT COMMENT
SELECT ITEMS� SELECT ITEMS
DELETE FILE
NEW FOLDER
FILE MANAGER � EDIT PATH
NEW FOLDER
PASTE
SORT MODE � NAME
ENABLE ALL ITEMS
DISABLE ALL ITEMS
4.206 Operating Manual 1313.9681.12 - 01
DATE
EXTENSION