R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Instrument Functions
Analyzer Mode
REF LEVEL The REF LEVEL softkey allows the reference level to be input in the currently active
unit (dBm, dBµV, etc.)
RANGE LOG
100 dB
RANGE LOG
MANUAL
RANGE
LINEAR
RF ATTEN MANUAL
RF ATTEN AUTO
NOISE CORR (ON OFF)
Side menu
REF LEVEL POSITION
REF LEVEL OFFSET
PHASE SETTINGS (option B71)� AUTOSCALE
GRID (ABS REL)
EL ATTEN AUTO (option B25)
EL ATTEN MANUAL (option B25)
EL ATTEN OFF (option B25)
RF INPUT (50W 75W)
Y-AXIS/DIV
Y-AXIS REF-VALUE
Y-AXIS REF-POS
PHASE OFFSET
PHASE (RAD DEG)
PHASEWRAP
(ON OFF)
MIXER � MIXER LVL AUTO
MIXER LVL MANUAL
Remote command: DISP:WIND:TRAC:Y:RLEV -60dBm
The RANGE LOG 100 dB softkey sets the level display range to 100 dB.
Remote command: DISP:WIND:TRAC:Y:SPAC LOG
DISP:WIND:TRAC:Y 100DB
The RANGE LOG MANUAL softkey activates the manual entry of the level display
range. Display ranges from 1 to 200 dB are allowed in 10 dB steps. Inputs which are
not allowed are rounded to the next valid value.
The default setting is 100 dB.
Remote command: DISP:WIND:TRAC:Y:SPAC LOG
DISP:WIND:TRAC:Y 120DB
The RANGE LINEAR softkey selects linear scaling for the level display range of the
R&S FSQr. In addition, it opens a submenu for selecting % or dB for the scaling.
Operating Manual 1313.9681.12 - 01 4.15