R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Remote Control – Description of Commands
HCOPy Subsystem
The command HCOPy:DEVice:ITEM:WINDow:TABle:STATe OFF as well as command
HCOPy:DEVice:ITEM:ALL enables the output of the whole screen.
HCOPy:ITEM:WINDow:TEXT
This command defines the comment text for measurement window 1 or 2 for printout, with a maximum
of 100 characters; line feed by means of character @).
Example: "HCOP:ITEM:WIND2:TEXT 'comment'"
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
HCOPy:ITEM:WINDow:TRACe:STATe ON | OFF
This command selects the output of the currently displayed trace.
Example: "HCOP:ITEM:WIND:TRACe:STAT ON"
Characteristics: *RST value: OFF
SCPI: device-specific
Mode: A
The command HCOPy:ITEM:WINDow:TRACe:STATe OFF as well as command HCOPy:
ITEM:ALL enables the output of the whole screen.
HCOPy:PAGE:ORIentation LANDscape | PORTrait
The command selects the format of the output (portrait and landscape) (hardcopy unit 1 or 2).
Example: "HCOP:PAGE:ORI LAND"
Characteristics: *RST value: -
SCPI: conform
Mode: A
The command is only available provided that the output device "printer" (HCOP:
DEST 'SYST:COMM:PRIN') has been selected.
6.120 Operating Manual 1313.9681.12 - 01