R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Instrument Functions
4.8.2.2 Normalization
External Generator Control – Option R&S FSP-B10
NORMALIZE The NORMALIZE softkey switches normalization on or off. The softkey is only available
if the memory contains a correction trace.
It is possible to shift the relative reference point within the grid using the REF VALUE
POSITION softkey. Thus, the trace can be shifted from the top grid margin to the
middle of the grid:
REF VALUE
POSITION
Fig. 4.30 Normalized display
In the SPLIT SCREEN setting, the normalization is switched on in the current window.
Different normalizations can be active in the two windows.
Normalization is aborted when the NETWORK mode is quit.
Remote command: CORR ON
The REF VALUE POSITION softkey (reference position) marks a reference position
in the active window on which the normalization (difference formation with a reference
curve) is performed.
When pressed for the first time, the softkey switches on the reference line and activates
the input of its position. The line can be shifted within the grid limits.
The reference line is switched off by pressing the softkey again.
The function of the reference line is explained in the section “Calibration Mechanism”
on page 4.243.
Operating Manual 1313.9681.12 - 01 4.239