R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Remote Control – Description of Commands
MMEMory:DELete:IMMediate
MMEMory Subsystem
This command deletes the indicated files. Any ’read only’ labels are ignored.
The indication of the file name contains the path and, optionally, the drive name. Indication of the path
complies with DOS conventions.
Parameter: ::= DOS file name
Example: "MMEM:DEL:IMM 'TEST01.HCP'"
'The file TEST01.HCP is deleted.
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value and no query.
MMEMory:LOAD:AUTO 1,
This command defines which device setting is automatically loaded after the device is switched on.
The contents of the file are read after switching on the device and used to define the new device state.
The file name includes indication of the path and may also include the drive. The path name complies
with DOS conventions.
Parameter: ::= DOS file name without extension;
FACTORY denotes the data set previously in the instrument
Example: "MMEM:LOAD:AUTO 1,'D:\USER\DATA\TEST'"
Characteristics: *RST value: FACTORY
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value and no query.
MMEMory:LOAD:STATe 1,
This command loads device settings from data set files (*.FSP). The contents of the file are loaded and
set as the new device state. Items can be individually deselected for the recall. The maximum items to
be loaded are the maximum number of items stored in the data set file. If items were deselected for
storage, thoses items cannot be recalled.
The file name includes indication of the path and may also include the drive name. The default path
for data set files is D:\USER\CONFIG.
Parameter: ::= DOS file name without extension
Example: "MMEM:LOAD:STAT 1,'A:TEST'"
Characteristics: *RST value: -
SCPI: conform
Mode: A
The data set defined as auto recall set will also be restored by a *RST-command.
This command is an event and therefore has no *RST value and no query.
6.136 Operating Manual 1313.9681.12 - 01