R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Remote Control – Description of Commands
MMEMory:CATalog?
MMEMory Subsystem
This command reads the indicated directory. According to DOS convention, wild card characters can
be entered in order to query e.g. a list of all files of a certain type.
The path name should be in conformance with DOS conventions and may also include the drive name.
Parameter: ::= DOS Path name
Example: "MMEM:CAT? 'D:\USER\DATA'"
'Returns the contents of the D:\USER\DATA directory
"MMEM:CAT? 'D:\USER\DATA\*.LOG'"
'Returns all files in D:\USER\DATA with .LOG extension
"MMEM:CAT? 'D:\USER\DATA\SPOOL?.WMF'"
'Returns all files in D:\USER\DATA whose names start with SPOOL, have 6 letters
and the .WMF extension .
Return value: List of file names in the form of strings separated by commas, i.e.
'SPOOL1.WMF','SPOOL2.WMF','SPOOL3.WMF'
Characteristics: *RST value: -
SCPI: conform
Mode: A
MMEMory:CDIRectory
This command changes the current directory.
In addition to the path name, the indication of the directory may contain the drive name. The path name
complies with the DOS conventions.
Parameter: ::= DOS path name
Example: "MMEM:CDIR 'D:\USER\DATA'"
'Returns the list of files in directory D:\USER\DATA.
Characteristics: *RST value: -
SCPI: conform
Mode: A
MMEMory:CLEar:ALL
This command deletes all device settings in the current directory. The current directory can be selected
with MMEM:CDIR. The default directory is D:.
Example: "MMEM:CLE:ALL"
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value and no query.
Operating Manual 1313.9681.12 - 01 6.133