R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Instrument Functions
SERVICE � INPUT RF
Side menu
SYSTEM MESSAGES
CLEAR ALL MESSAGES
INPUT CAL
SELFTEST
SELFTEST RESULTS
ENTER PASSWORD
1. Side menu
CAL GEN 128 MHZ
CAL GEN COMB PULSE
2. side menu
COMMAND TRACKING
EXPORT / IMPORT DEV
DATA
FIRMWARE UPDATE � FIRMWARE UPDATE
OPEN START MENU
FM DEMOD ANALOG �
POWER METER �
RESTORE FIRMWARE
UPDATE PATH
IF SHIFT � IF SHIFT OFF
IF SHIFT A
IF SHIFT B
AUTO
Basic Settings
The following settings can be modified here:
• The REFERENCE INT/EXT softkey determines the source of the reference. For
details refer to section “External Reference” on page 4.173.
• The NOISE SRC ON/OFF softkey switches on and off the voltage supply for an
external noise source. For details refer to section “External Noise Source” on
page 4.174.
• The SIGNAL SOURCE softkey opens a submenu to switch YIG filter, IQ dither
and RF path. For details refer to section “Signal Source” on page 4.174
• The PREAMP softkey switches on the RF preamplifier gain. This softkey is only
available with option EL. ATTENUATOR (B25). For details refer to section “RF
Preamplifier” on page 4.177.
• The TRANSDUCER softkey opens a submenu for entering the correction
characteristics for transducers. For details refer to section “TRANSDUCER” on
page 4.178.
4.172 Operating Manual 1313.9681.12 - 01