R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Remote Control – Description of Commands
[SENSe:]ESPectrum:RTYPe PEAK | CPOWer
SENSe Subsystem
This command sets selects the type of power measurement in the reference range:
The numeric suffixes specify the range. The numeric suffix at SENSe is irrelevant.
Parameter: PEAK: Measures the highest peak within the reference range.
CPOWer: Measures the channel power within the reference range (integral
bandwidth method).
Example: "ESP:RTYP PEAK"
'selects highest peak
Characteristics: *RST value: CPOW
SCPI: device-specific
Mode: A
[SENSe:]ESPectrum:STANdard:DELete
This command deletes a file that contains a spectrum emission mask measurement configuration.
The default path to the file is "D:\R_S\INSTR\SPURS_STD". The file name has to be specified without
the *.xml file extension.
The numeric suffix at SENSe is irrelevant.
This command is an event and therefore has no RST value and no query.
Example: "ESP:STAN:DEL 'custom_standard'"
'deletes the file called custom_standard.xml
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
[SENSe:]ESPectrum:STANdard:SAVE
This command stores the current spectrum emission mask configuration to a file in the R&S FSQ
memory.
The file format is *.xml. The default path is "D:\R_S\INSTR\SPURS_STD".
The numeric suffix at SENSe is irrelevant.
This command is an event and therefore has no RST value and no query.
Example: "ESP:STAN:SAVE 'custom_standard'"
'saves the configuration to a file called custom_standard.xml
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
Operating Manual 1313.9681.12 - 01 6.169