R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Remote Control – Description of Commands
Position Option
25 R&S FSQ-B72
(new)
26 R&S FS-K76 TD SCDMA BTS
27 reserved
IQ Bandwidth Extension for R&S FSQ
(120 MHz BW for f < 3.6 GHz)
*OPT-Code Pos. 48 is also displayed for R&S FSQ-B72
28 R&S FS-K30 Noise Figure and Gain Measurments
29 R&S FS-K40 Phase Noise Tests
30 R&S FS-K5 GSM-GSM/EDGE
31 R&S FS-K77 TD SCDMA UE
32 R&S FS-K7 FM Demodulator
33 R&S FS-K8 Application Firmware Bluetooth® Transmitter measurement
34 R&S FS-K9 Power sensor measurements
35 R&S FS-K72 WCDMA 3G FDD BTS
36 R&S FS-K73 WCDMA 3G FDD UE
37 reserved
38 R&S FS-K82 CDMA2000 Downlink
39 R&S FS-K83 CDMA2000 Uplink
40 R&S FS-K84 1xEV-DO Downlink
41 R&S FS-K85 1xEV-DOUpnlink
42 R&S FS-K86 1xEV-DV Downlink
43 R&S FSQ-K90 W-Lan 802.11a
44 R&S FSQ-K91 W-Lan 802.11b/g
45 R&S FSQ-K92 W-Lan 802.16
46 reserved
47 R&S FSQ-B71 I/Q Baseband Input
48 R&S FSQ-B72 I/Q Bandwidth Extension for FSQ
49 R&S FSQ-K70 Vector Analysis
50...51 reserved
Common Commands
Example:
0,B4,0,0,0,0,B9,B10,0,B12,B17,0,0,0,B100,B27,0,0,B21,0,0,0,B25,K74,0,K76,0,0,0,K5,K77,K7,K8,K
9,K72,K73,0,K82,K83,K84,K85,0,0,0,0,0,B71,B72,K70,0,0,0,0,0,0,0,0
*PCB 0 to 30
PASS CONTROL BACK indicates the controller address which the GPIB control is to be returned to
after termination of the triggered action.
*PRE 0 to 255
PARALLEL POLL REGISTER ENABLE sets the parallel poll enable register to the indicated value.
The query form *PRE? returns the contents of the parallel poll enable register in decimal form.
6.10 Operating Manual 1313.9681.12 - 01