18.12.2012 Views

R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Signal Analyzer - Rohde & Schwarz

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

R&S <strong>FSQ</strong> Instrument Functions<br />

COM<br />

INTERFACE<br />

Serial Interface Configuration<br />

Basic Settings<br />

The COM INTERFACE softkey activates the COM INTERFACE table for entry of the<br />

serial interface parameters.<br />

The following parameters can be configured in the table:<br />

Baud rate data transmission rate<br />

Bits number of data bits<br />

Parity bit parity check<br />

Stop bits number of stop bits<br />

HW-Handshake hardware handshake protocol<br />

SW-Handshake software handshake protocol<br />

Owner assignment to the measuring instrument or computer<br />

Baud – Data transmission rate<br />

The R&S <strong>FSQ</strong> supports baud rates between 110 and 128000 baud. The default setting<br />

is 9600 baud.<br />

Remote command: SYST:COMM:SER:BAUD 9600<br />

Bits – Number of data bits per word<br />

For the transmission of text without special characters, 7 bits are adequate. For<br />

binary data as well as for text with special characters, 8 bits must be selected<br />

(default setting).<br />

Remote command: SYST:COMM:SER:BITS 7<br />

Operating Manual 1313.9681.12 - 01 4.187

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!