R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Remote Control – Description of Commands
1) HP 8594E only
2) Command will be accepted without error message, but will be ignored
GPIB Commands of HP Models 856xE, 8566A/B, 8568A/B and 8594E
Command Supported subset Function Corresponding
HP-Models
VB VB
HZ|KHZ|MHZ|GHZ
VB DN
VB UP
VB AUTO
VB?
VBR 1) VBR
VBR DN
VBR UP
VBR?
Video
Bandwidth
Video
Bandwidth
Ratio
HP 856xE /
HP 8566B /
HP 8568B /
HP 8594E
HP 856xE /
HP 8566B /
HP 8568B /
HP 8594E
VIEW VIEW TRA|TRB|TRC HP 856xE /
HP 8566B /
HP 8568B /
HP 8594E
VTL VTL DB|DM
VTL DN
VTL UP
VTL?
Video Trigger
Level
HP 856xE /
HP 8594E
6.23.3 Special Features of the Syntax Parsing Algorithms for 8566A and
8568A Models
The command syntax is very different for models A and B. Different names are assigned to identical
instrument functions, and the command structure likewise differs considerably between models A and
models B.
The command structure for models A is as follows:
::=
[][|][][][]...
::= [][][][][][]...
::= UP|DN
where
= see Table "Supported Commands"
= integer or floating-point numerical value
= DM | -DM | DB | HZ | KZ | MZ | GZ | MV | UV | SC | MS | US
= | | | |
= 3210
Status
available
available
available
available in V3.3x and above
= 310
Command sections given in [ ] are optional.
The R&S FSQ GPIB hardware differs from that used in the HP analyzers. Therefore, the following constraint
exists:
| are still used as delimiters since the GPIB hardware is able to identify them. The other
delimiters are identified and evaluated during syntax analysis.
6.274 Operating Manual 1313.9681.12 - 01