R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Instrument Functions
Basic Settings
Display lines are exclusively used to optically mark relevant frequencies or points in
time (span = 0) as well as constant level values. It is not possible to check automatically
whether the marked level values have been underranged or exceeded.
4.6.1.1 Selection of Limit Lines
LINES The LINES key opens the menu for fixing the limit lines and the display lines.
SELECT LIMIT LINE
EDIT LIMIT LINE /
NEW LIMIT LINE �
COPY LIMIT LINE
DELETE LIMIT LINE
X OFFSET
Y OFFSET
NAME
VALUES
INSERT VALUE
DELETE VALUE
SHIFT X LIMIT LINE
SHIFT Y LIMIT LINE
SAVE LIMIT LINE
DISPLAY LINES � DISPLAY LINE 1 /
DISPLAY LINE 2
FREQUENCY LINE 1/
FREQUENCY LINE 2
TIME LINE 1 /
TIME LINE 2
PHASE LINE 1 /
PHASE LINE 2
The SELECTED LIMIT LINE display field provides information concerning the characteristics
of the marked limit lines.
In the LIMIT LINES table, the limit lines compatible to the settings of the active
screen can be enabled.
4.154 Operating Manual 1313.9681.12 - 01