18.12.2012 Views

R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Signal Analyzer - Rohde & Schwarz

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

R&S <strong>FSQ</strong> Remote Control – Description of Commands<br />

Characteristics: *RST value: -<br />

SCPI: device-specific<br />

Mode: A<br />

This command is only available with the option R&S FSU-B21.<br />

[SENSe:]CORRection:CVL:HARMonic <br />

SENSe Subsystem<br />

This command defines the used mixer harmonic in the Conversion Loss Table. Prior to this command,<br />

the command SENS:CORR:CVL:SEL must be sent.<br />

Example: "CORR:CVL:SEL 'LOSS_TAB'"<br />

"CORR:CVL:HARM 4"<br />

Characteristics: *RST value: -<br />

SCPI: device-specific<br />

Mode: A<br />

This command is only available with the option R&S FSU-B21.<br />

[SENSe:]CORRection:CVL:MIXer <br />

This command defines the type designation of the mixer in the Conversion Loss Table. Prior to this<br />

command, the command SENS:CORR:CVL:SEL must be sent.<br />

Parameter: ::= Type designation of mixer with a maximum of 16 characters<br />

Example: "CORR:CVL:SEL 'LOSS_TAB'"<br />

"CORR:CVL:MIX 'FS_Z60'"<br />

Characteristics: *RST value: -<br />

SCPI: device-specific<br />

Mode: A<br />

This command is only available with the option R&S FSU-B21.<br />

[SENSe:]CORRection:CVL:PORTs 2 | 3<br />

This command defines the type of mixer in the Conversion Loss Table. Prior to this command, the<br />

command SENS:CORR:CVL:SEL must be sent.<br />

Example: "CORR:CVL:SEL 'LOSS_TAB'"<br />

"CORR:CVL:PORT 3"<br />

Characteristics: *RST value: -<br />

SCPI: device-specific<br />

Mode: A<br />

This command is only available with the option R&S FSU-B21.<br />

Operating Manual 1313.9681.12 - 01 6.155

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!