R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Instrument Functions
Child Node Attribute Value Parameter
Description
RBW Bandwidth Yes
Type NORM | CFIL | RRC | P5 | P5D No
VBW Bandwidth Yes
Detector NEG | POS | SAMP | RMS |
AVER
Sweep Mode Manual | Auto Yes
Time No
Amplitude No
ASCII File Export Format (Spectrum Emission Mask)
Analyzer Mode
Mandatory
No (if specified, it has
to be equal in all
ranges)
ReferenceLevel Value Yes, if the
ReferenceLevel child
node is used
Unit dBm Yes, if the
ReferenceLevel child
node is used
RF Attenuation Mode Manual | Auto Yes, if the
ReferenceLevel child
node is used
The first part of the file lists information about the R&S FSQ and the general setup.
File Content Description
RefType;CPOWER;
TxBandwidth;9540000M;Hz
FilterState; ON;
Alpha;0.22;
PeaksPerRange;1;
Values;4;
0;-22500000;-9270000;1000000;2986455000;
-74.762840270996094;-10.576210021972656;
-45.762840270996094;PASS;
1;-9270000;-4770000;100000;2991405000;
-100.17695617675781;-35.990325927734375;
-1.490325927734375;PASS
3;4770000;9270000;100000;3005445000;
-100.17695617675781;-35.990325927734375
;-1.490325927734375;PASS;
4;9270000;22500000;1000000;3018225000;
-74.762840270996094;-10.576210021972656;
-45.762840270996094;PASS;
Reference range settings
Evaluation list information
information about each peak:
;
(related to the channel power)
(positive value means above the
limit line)
(pass = 0, fail = 1)
Operating Manual 1313.9681.12 - 01 4.145