R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Remote Control – Basics
5.7.5 Resetting Values of the Status Reporting System
Status Reporting System
The table below comprises the different commands and events causing the status
reporting system to be reset. None of the commands, except for *RST and SYSTem:
PRESet influences the functional instrument settings. In particular, DCL does not
change the instrument settings.
Event Switching on
supply voltage
Power-On-Status-
Clear
Effect 0 1
DCL,SDC
(Device Clear,
Selected
Device Clear)
*RST or
SYSTem:
PRESet
STATus:
PRESet
Clear STB,ESR — yes — — — yes
Clear SRE,ESE — yes — — —
Clear PPE — yes — — —
Clear EVENTt parts of the
registers
Clear Enable parts of all
OPERation and QUEStionable
registers, Fill Enable parts of all
other registers with "1".
Fill PTRansition parts with "1" ,
Clear NTRansition parts
— yes — — yes
— yes — — yes —
— yes — — yes —
Clear error queue yes yes — — — yes
Clear output buffer yes yes yes 1) 1) 1)
Clear command processing and
input buffer
yes yes yes — — —
1) Every command being the first in a command line, i.e., immediately following a clears the output
buffer.
5.34 Operating Manual 1313.9681.12 - 01
*CLS