R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Instrument Functions
CONFIGURE
NETWORK
Basic Settings
The CONFIGURE NETWORK softkey opens the dialog box with the network settings.
The softkey is used to modify an existing network configuration after the corresponding
tabs are selected (see the Quick Start Guide 6, “ LAN Interface”).
Remote command: --
SHOW CONFIG The SHOW CONFIG softkey shows the current network configuration.
NETWORK
LOGIN
A PC keyboard with trackball (or mouse instead) is required for the installation/
configuration of the network support.
The NETWORK LOGIN softkey opens the dialog box with the auto login settings.
As of firmware version 4.6x, the default username is “instrument” with the password
“894129”.
As of firmware version 4.4x, the default username is “instrument” with the password
“123456”.
Prior to firmware version 4.4x, the default username and password were both“instrument”.
When a network is installed, the default user name 'instrument' and its password can
be adapted to a new user (see the Quick Start Guide 6, “ LAN Interface”.).
Operating Manual 1313.9681.12 - 01 4.191