R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Remote Control – Description of Commands
MMEMory:STORe:STATe 1,
MMEMory Subsystem
This command stores the current device settings in a specified file name.
The file name includes indication of the path and may also include the drive name. The numeric suffix
in STORe is irrelevant with this command.
For a detailed discription of the selectable items refer to the command “MMEMory:SELect[:ITEM]:ALL”
on page 6.138.
Parameter: = DOS file name without extension
Example: "MMEM:STOR:STAT 1,'TEST'"
Characteristics: *RST value: -
SCPI: conform
Mode: A
This command is an event and therefore has no *RST value and no query.
MMEMory:STORe:TRACe 1 to 3,
This command stores the selected trace in a file with ASCII format. The file format is described in
chapter “Instrument Functions”, section “ASCII FILE EXPORT” on page 4.45.
The numeric suffix at STORe indicates the measurement window (screen A or B).
The decimal separator (decimal point or comma) for floating-point numerals contained in the file is
defined with the FORMat:DEXPort:DSEParator command.
Parameter: 1 to 3 := selected measurement curve (trace)
:= file name in compliance to DOS conventions, including indication
of the path and the drive name
Example: "MMEM:STOR2:TRAC 3,'D:\TEST.ASC'"
'Transfers the data of trace 3 in screen B to a file named TEST.ASC on drive D:.
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value and no query.
For Spurious Measurement an extended file format is used:
6.142 Operating Manual 1313.9681.12 - 01