R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Instrument Functions
Child Node Attribute Value Parameter
Description
DefaultLimitFailMode Absolute | Relative |
Absolute and Relative |
Absolute or Relative
Analyzer Mode
Table 4-5 Attributes and child nodes of the Range element (normal ranges)
Child Node Attribute Value Parameter
Description
Index 0...19 Indexes are continous
and have to start with 0
Mandatory
4.144 Operating Manual 1313.9681.12 - 01
Yes
Mandatory
Name Name of the range Only if
ReferenceChannel
contains a name and
range is reference
range
ShortName Short name of the range No
ChannelType TX | Adjacent Yes
WeightingFilter Only if
ReferencePower
method is "TX
Channel Power" and
the range is the
reference range"
Type RRC | CFILTer Type of weighting filter Yes
RollOfffactor 0...1 Excess filter bandwidth Only if filter type is
RRC
Bandwidth Filter bandwidth Only if filter type is
RRC
FrequencyRange Yes
Start Start value of the range Yes
Stop Stop value of the range Yes
Limit A Range must contain
exactly two limit nodes;
one of the limit nodes
has to have a relative
unit (e.g. dBc), the other
one must have an
absolute unit (e.g. dBm)
Start Value Power limit at start
frequency
Unit dBm/Hz | dBm | dBc | dBr | dB Sets the unit of start
frequency
Stop Value Power limit at stop
frequency
Unit dBm/Hz | dBm | dBc | dBr | dB Sets the unit of stop
frequency
LimitFailMode Absolute | Relative | Absolute
and Relative | Absolute or
Relative
Yes
Yes
Yes
Yes
Yes
Yes
No (if specified, it has
to be equal to Default-
LimitFailMode