R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
Devices Command (Sheet 14 of 47) Parameter Notes
R&S
FSQ
R&S
FSQ
R&S
FSQ
R&S
FSQ
R&S
FSQ
R&S
FSQ
R&S
FSQ
CALCulate:MATH:MODE LINear | LOGarithmic affects all traces on the
R&S FSQ; therefore the
numeric suffix :
MATH is not
allowed for the
R&S FSQ
FSE CALCulate:MATH:MODE LINear | LOGarithmic for FSE, only the trace
indicated by a numeric
suffix is affected
CALCulate:MATH:POS -100PCT to 200PCT new function for
R&S FSQ; replacement
for CALC:RLINe of the
FSE
FSE CALCulate:MATH:STATe ON | OFF for R&S FSQ, traces
can only be subtracted
from trace 1; therefore
there is no numeric suffix
behind :MATH
FSE CALCulate:MATH[:EXPRession][:DEFine] for R&S FSQ, traces
can only be subtracted
from trace 1; therefore
there is no numeric suffix
behind :MATH and
may only consist
of (TRACE1-TRACE2)
or (TRACE1-TRACE3)
FSE CALCulate:RLINe MIN to MAX not available for
R&S FSQ (replaced by
CALC:MATH:POS)
FSE CALCulate:RLINe:STATe ON | OFF not available for
R&S FSQ (replaced by
CALC:MATH:POS)
FSE CALCulate:THReshold MIN to MAX
FSE CALCulate:THReshold:STATe ON | OFF
FSE CALCulate:TLINe 0 to 1000s not available on the
R&S FSQ; replaced by
CALC:SLIMits:LEFT and
CALC:SLIMits:RIGHt
FSE CALCulate:TLINe:STATe ON | OFF not available on the
R&S FSQ; replaced by
CALC:SLIMits:LEFT and
CALC:SLIMits:RIGHt
FSE CALCulate:UNIT:ANGLe DEG | RAD not available for
R&S FSQ
CALCulate:UNIT:POWer DBM | V | A | W | DBPW
| WATT | DBUV | DBMV
| VOLT | DBUA |
AMPere
available units are
compatible to the FSE
6.296 Operating Manual 1313.9681.12 - 01