18.12.2012 Views

R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Signal Analyzer - Rohde & Schwarz

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

R&S <strong>FSQ</strong> Remote Control – Description of Commands<br />

6.23.4.3 Commands for Harmonic Distortion<br />

GPIB Commands of HP Models 856xE, 8566A/B, 8568A/B and 8594E<br />

Command Supported subset Function Corresponding<br />

HP-Models<br />

SP_HARM Executes harmonis distortion<br />

measurement<br />

SP_H_MAX Maximum harmonic to be<br />

measured, range is from 2 to 10<br />

Status<br />

HP 856xE available in V4.1x and<br />

above<br />

HP 856xE available in V4.1x and<br />

above<br />

SP_H_FFLAG Displays or hides harmonics HP 856xE available in V4.1x and<br />

above<br />

SP_HPWMIN Minimum resolution bandwidth HP 856xE available in V4.1x and<br />

above<br />

SP_H_LVL<br />

[1..10]<br />

Array of amplitudes for each<br />

harmonic in dBc relative to the<br />

fundamental. SP_H_LVL[1] = 0<br />

(the level of the fundamental in<br />

dBc). The index is the number of<br />

the harmonic<br />

SP_THD Total harmonic distortion in<br />

percent<br />

SP_H_NS[1..10] Array of flags corresponding to<br />

each measurement in the<br />

SP_H_LVL array. A value of 0<br />

denotes a good measurement<br />

SP_H_FRQ Frequency of the fundamental in<br />

Hz<br />

SP_H_AMP Amplitude of the fundamental in<br />

dBm<br />

HP 856xE available in V4.1x and<br />

above<br />

HP 856xE available in V4.1x and<br />

above<br />

HP 856xE available in V4.1x and<br />

above<br />

HP 856xE available in V4.1x and<br />

above<br />

HP 856xE available in V4.1x and<br />

above<br />

6.276 Operating Manual 1313.9681.12 - 01

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!