R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Instrument Functions
R&S FSQ Initial Configuration – PRESET Key
4.2 R&S FSQ Initial Configuration – PRESET Key
PRESET Using the PRESET key, the R&S FSQ can be set to a predefined initial state.
The settings are selected in a way that the RF input is always protected against
overload, provided that the applied signal levels are in the allowed range for the
instrument.
The initial instrument state set by the PRESET key can be adapted to arbitrary
applications using the STARTUP RECALL function. With this function the STAR-
TUP RECALL data set is loaded upon pressing the PRESET key. For further information
refer to section “Saving and Recalling Data Sets – FILE Key” on
page 4.205.
Pressing the PRESET key causes the R&S FSQ to enter its initial state according to
the following table:
Operating Manual 1313.9681.12 - 01 4.5