R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Remote Control – Description of Commands
HCOPy Subsystem
WMF (WINDOWS Metafile) and EWMF (Enhanced Metafile Format): Data formats
for output to files which can be directly processed at a later point in time for
documentation purposes using suitable software. WMF can be used only for output
to a file (HCOPy:DEVice 'SYST:COMM:MMEM'), EWMF can also be used for
output to the clipboard (HCOPy:DEVice 'SYST:COMM:CLIP').
BMP (Bitmap): Data format, exclusively for output to files (HCOPy:DEVice
'SYST:COMM:MMEM').
BMP is available only for HCOPY:MODE SCReen.
Example: "HCOP:DEV:LANG WMF"
Characteristics: *RST value: -
SCPI: conform
Mode: A
HCOPy[:IMMediate]
This command starts a hardcopy output. The numeric suffix selects which printer configuration (1 or 2)
is to be used for the hardcopy output. If there is no suffix, configuration 1 is automatically selected.
Example: "HCOP"
Characteristics: *RST value: -
SCPI: conform
Mode: A
"HCOPy:IMM1"
'Starts the hardcopy output to device 1 (default).
"HCOPy:IMM2"
'Starts the output to device 2.
This command is an event and therefore has no *RST value and no query.
HCOPy:ITEM:ALL
This command selects the complete screen to be output.
The hardcopy output is always provided with comments, title, time and date. As an alternative to the
whole screen, only traces (commands 'HCOPy:ITEM:WINDow:TRACe:STATe ON') or tables
(command 'HCOPy:ITEM:WINDow:TABLe:STATe ON') can be output.
Example: "HCOP:ITEM:ALL"
Characteristics: *RST value: -
SCPI: conform
Mode: A
This command is an event and therefore has no *RST value and no query.
HCOPy:ITEM:WINDow:TABle:STATe ON | OFF
This command selects the output of the currently displayed tables.
Example: "HCOP:ITEM:WIND:TABL:STAT ON"
Characteristics: *RST value: OFF
SCPI: device-specific
Mode: A
Operating Manual 1313.9681.12 - 01 6.119