R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Instrument Functions
Basic Settings
The following diagrams show the effect that interpolation has on the calculated
trace:
Fig. 4.17 Linear frequency axis and linear interpolation
Fig. 4.18 Logarithmic frequency axis and interpolation
Comment - Entry of comment
Any comment with a maximum length of 50 characters can be entered.
Remote command: CORR:TRAN:COMM
INSERT LINE The INSERT LINE softkey inserts an empty line above the marked reference value.
When entering a new reference value in the line, the ascending order of frequencies
must be taken into consideration, however.
Remote command: --
DELETE LINE The DELETE LINE softkey deletes the marked reference value (complete line). The
reference values that follow move one line up.
SAVE TRD
FACTOR
Remote command: --
The SAVE TRD FACTOR softkey saves the changed table in a file on the internal
hard disk.
If there is already a transducer factor that has the same name, a confirmation query
is output.
If the new factor is active, the new values become immediately valid.
Remote command: --
(executed automatically after the definition of the
reference values)
4.182 Operating Manual 1313.9681.12 - 01