R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Instrument Functions
Basic Settings
A file or a directory in the table is selected via cursor keys. The ENTER key is used
to switch from one subdirectory to another. The softkeys COPY, RENAME, CUT and
DELETE are only visible if the entry focus is set to a file and not to a directory.
The dots ".." open up the next higher directory.
EDIT PATH The EDIT PATH softkey activates the input of the directory which will be used in subsequent
file operations.
Use CURSOR UP / DOWN to select a drive and confirm your selection with ENTER.
Open subdirectories by using CURSOR RIGHT, and use CURSOR LEFT to close
them again.
When you have found the subdirectory you looked for, mark it with ENTER.
Remote command: MMEM:MSIS "a:"
MMEM:CDIR "D:\user "
NEW FOLDER The NEW FOLDER softkey creates subdirectories.
The entry of an absolute path name (e.g. "\USER\MEAS") as well as the path relative
to the current directory (e.g. "..\MEAS") is possible.
Remote command: MMEM:MDIR "D:\user\test"
Operating Manual 1313.9681.12 - 01 4.211