R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Instrument Functions
FREQUENCY
SWEEP
Generator Interface
Type
1) The upper frequency limit depends on the frequency option the generator is fitted with.
External Generator Control – Option R&S FSP-B10
SMT02 GPIB 5.0 kHz 1.5 GHz -144 +13
SMT03 GPIB 5.0 kHz 3.0 GHz -144 +13
SMT06 GPIB 5.0 kHz 6.0 GHz -144 +13
SMV03 GPIB 9 kHz 3.3 GHz -140 +13
SMU200A 3) TTL 100 kHz 6 GHz -145 +19
SMX GPIB 100 kHz 1.0 GHz -137 +13
SMY01 GPIB 9 kHz 1.04 GHz -140 +13
SMY02 GPIB 9 kHz 2.08 GHz -140 +13
HP8254A GPIB 250 kHz 4 GHz -135 +25
HP8257D GPIB 250 kHz 7 GHz -135 +25
HP8340A GPIB 10 MHz 26.5 GHz -110 10
HP8648 GPIB 9 kHz 4 GHz -136 10
HP ESG-A
Series 1000A,
2000A,
3000A,
4000A
HP ESG-D
SERIES
E4432B
Generator
Min Freq
Generator
Max Freq
GPIB 250 kHz 4 GHz -136 20
GPIB 250 kHz 3 GHz -136 +10
In the dialog box that selects the generator, the upper frequency is indicated by the extension of the generator type (e.g. generator type
SMBV100A6 means an SMBV100A with an upper frequency of 6 GHz).
The respective frequency is indicated by the name of the generator as shown by the dialog on the R&S FSQ, e.g. the SMBV100A6 means an
upper frequency limit of 6 GHz.
2) The upper frequency limit, minimum and maximum power depends on the model of the R&S SMR. In addition, the minimum and maximum
power depends on whether options R&S SMR-B15/-B17 is installed or not. The lower frequency limit depends on whether option
R&S SMR-B11 is installed or not.
Refer to the data sheet of the R&S SMR for more information.
3) The upper frequency limit, minimum and maximum power depend on which RF Path option R&S SMU-B10x is installed and on whether
option R&S SMU-B31 is installed or not.
Refer to the data sheet of the R&S SMU for more information.
The FREQUENCY SWEEP softkey opens a table for setting the generator level as
well as the multiplier and the offset used to derive the generator frequency from the
analyzer frequency.
This table also permits configuration of two generators so that switching between
two different configurations is easily possible.
The individual fields contain the following settings:
Generator
Min Power
dBm
Generator
Max Power
dBm
Operating Manual 1313.9681.12 - 01 4.249