R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Instrument Functions
Display resolution
Basic Settings
When the display of the front-panel keys is switched on, the screen resolution of the
instrument changes to 1024x768 pixels. Only a section of the total screen is then
displayed on the LC display, which will automatically be shifted on mouse moves.
In order to obtain a complete display of the user interface, an external monitor is to
be plugged into the corresponding connector at the rear panel. Prior to performing
the resolution change the user is prompted for confirmation whether the required
monitor is connected.
Switching off the front-panel display restores the original screen resolution.
Key assignment
Button labels largely correspond to those of the front-panel keys. The rotation function
of the rotary knob is assigned to the 'KNOB LEFT' and 'KNOB RIGHT' buttons,
the press function () to 'KNOB PRESS'.
The labels of the softkey buttons (F1 to F9) and of the hotkey buttons (C-F1 to C-F7)
indicate that the keys can be operated directly by means of the corresponding function
keys F1 to F9 or F1 to F7 of a PS/2 keyboard.
Remote command: SYST:DISP:FPAN ON
LXI The LXI softkey opens a submenu to configure LXI.
DISPLAY (ON OFF)
INFO
PASSWORD
DESC
LAN RESET
LXI Activation
The LXI has to be activated after the firmware update.
1. Connect the R&S FSQ to the LAN.
2. Open the Windows Start Menu either with the OPEN START MENU softkey, the
CRTL-ESC shortcut or the Windows key.
3. Select LXI Configuration.
LXI Deactivation
1. Open the Windows Start Menu and select the LXI Configuration item.
2. Select the Turn LXI Off item.
4.196 Operating Manual 1313.9681.12 - 01