R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Instrument Functions
Basic Settings
One limitation is, however, that software handshaking cannot be used for the transmission
of binary data, since the control characters XON and XOFF require bit combinations
that are also used for binary data transmission.
Default setting is NONE.
Remote command: SYST:COMM:SER:PACE NONE
Owner – Assignment of the interface
The serial interface can be assigned alternatively to the measuring instrument section
or to the computer section.
If the interface is assigned to one section of the instrument, it is not available to the
other section.
INSTRUMENTThe interface is assigned to the measuring instrument section.
Outputs to the interface from the computer section are not possible
and will get lost.
OS The interface is assigned to the computer section. It cannot be
used by the measuring instrument section. This means that
remote control of the instrument via the interface is not possible.
Setting Date and Time
TIME+DATE The TIME+DATE softkey activates the entry of time and date for the internal realtime
clock.
Time - Input of time
In the corresponding dialog box, the time is partitioned into two input fields so that
hours and minutes can be entered independently.
Remote command: SYST:TIME 21,59
Date - Input of Date
In the corresponding dialog box, the date is partitioned into 3 input fields so that day,
month and year can be input separately.
For the selection of the month, pressing a unit key opens a list of abbreviations
wherein the desired month can be selected.
Remote command: SYST:DATE 1009,03,01
Configuration of Network Settings
The instrument can be connected to an Ethernet LAN (local area network) by means
of the LAN Interface. This allows data transmission via the network and the use of
network printers. The network card is able to handle both 10 MHz Ethernet IEEE
802.3 and 100 MHz Ethernet IEEE 802.3u.
Operating Manual 1313.9681.12 - 01 4.189