R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Instrument Functions
COLOR
(ON OFF)
SCREEN
COLORS
OPTIMIZED
COLOR SET
Basic Settings
The (COLOR ON OFF) softkey switches over from color output to black-and-white
output. All color-highlighted areas are printed in white and all color lines in black.
This improves the contrast on the printout. The default setting is COLOR ON.
Remote command: HCOP:DEV:COL ON
The SCREEN COLORS softkey selects the current screen colors for the printout.
The background is always printed in white and the grid in black.
Remote command: HCOP:CMAP:DEF1
The OPTIMIZED COLOR SET softkey selects an optimized color setting for the
printout to improve the visibility of the colors on the hardcopy.
Trace 1 is blue, trace 2 black, trace 3 green, and the markers are turquoise.
The other colors correspond to the display colors of the DISP – CONFIG DISPLAY –
DEFAULT COLORS 1 softkey.
The background is always printed in white and the grid in black.
Remote command: HCOP:CMAP:DEF2
USER DEFINED The USER DEFINED softkey opens a submenu for user-defined color selection (see
submenu USER DEFINED COLORS).
Remote command: HCOP:CMAP:DEF3
4.218 Operating Manual 1313.9681.12 - 01