R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Remote Control – Description of Commands
[SENSe:]LIST:STANdard:CATalog?
SENSe Subsystem
This command queries the names of customized spurious emission measurement configuration files
currently stored on the hard disk of the R&S FSQ.
The command queries the files that are in the folder "D:\R_S\INSTR\SPURS_STD". The file extension
(*.xml) is not returned.
The numeric suffix at SENSe is irrelevant.
This command is a query and therefore has no *RST value.
Example: "LIST:STAN:CAT?"
'Returns the name of spurious emission configuration files.
Characteristics: *RST value: --
SCPI: device-specific
Mode: A
[SENSe:]LIST:STANdard:DELete
This command deletes a file that contains a spurious emission measurement configuration.
The default path to the file is "D:\R_S\INSTR\SPURS_STD". The file name has to be specified without
the *.xml file extension.
The numeric suffix at SENSe is irrelevant.
This command is an event and therefore has no RST value and no query.
Example: "LIST:STAN:DEL 'custom_standard'"
'deletes the file called custom_standard.xml
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
[SENSe:]LIST:STANdard:SAVE
This command stores the current spurious emission measurement configuration to a file on the
R&S FSQ hard disk.
The file format is *.xml. The default path is "D:\R_S\INSTR\SPURS_STD".
The numeric suffix at SENSe is irrelevant.
This command is an event and therefore has no RST value and no query.
Example: "LIST:STAN:SAVE 'custom_standard'"
'saves the configuration to a file called custom_standard.xml
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
Operating Manual 1313.9681.12 - 01 6.185