R&S FSQ Signal Analyzer - Rohde & Schwarz

R&S FSQ Remote Control – Description of Commands
CALCulate:DELTamarker:MAXimum:RIGHt
CALCulate Subsystem
This command positions the specified delta marker to the next smaller maximum value to the right of
the current value (i.e. ascending X values). The corresponding delta marker is activated first, if
necessary.
Example: "CALC2:DELT:MAX:RIGH"
'Sets delta marker 1 in screen B to the next smaller maximum value to the right of
the current value.
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value and no query.
CALCulate:DELTamarker:MINimum:LEFT
This command positions the specified delta marker to the next higher minimum value to the left of the
current value (i.e. descending X values). The corresponding delta marker will be activated first, if
necessary.
Example: "CALC:DELT:MIN:LEFT"
'Sets delta marker 1 in screen A to the next higher minimum to the left of the current
value.
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value and no query.
CALCulate:DELTamarker:MINimum:NEXT
This command positions the specified delta marker to the next higher minimum value of the trace. The
corresponding delta marker will be activated first, if necessary.
Example: "CALC1:DELT2:MIN:NEXT"
'Sets delta marker 2 in screen A to the next higher minimum value.
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value and no query.
CALCulate:DELTamarker:MINimum[:PEAK]
This command positions the specified delta marker to the current minimum value of the trace. The
corresponding delta marker will be activated first, if necessary.
Example: "CALC2:DELT3:MIN"
'Sets delta marker 3 in screen B to the minimum value of the associated trace.
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value and no query.
6.18 Operating Manual 1313.9681.12 - 01