Complete Compiled Specification.pdf - Peck Ormsby Construction

SECTION 02007- SITE SIGNAGE
PART 1 - GENERAL
1.1 SUMMARY
A. Section Includes: Providing post-mounted site traffic signage where indicated.
B. Related Documents: Conditions of the Contract, General Requirements, and Drawings apply
to the Work of this Section.
C. Related Sections:
1. Asphalt Paving: Section 02005
2. Concrete Paving: Section 02006
3. Pavement Markings: Section 02005
1.2 SUBMITTALS
A. General: Submit the following:
B. Product Data: Manufacturer's data for each type of sign and post indicated.
C. Manufacturer’s installation instruction, for information only.
1.3 QUALITY ASSURANCE
A. Manufacturer shall have a minimum of five years experience in the manufacturing of traffic
signage of the type specified for this Project.
B. Codes and Standards: Comply with the City Building Code, latest edition, and other
requirements of authorities having jurisdiction.
1.4 PRODUCT DELIVERY
A. Deliver materials in factory packages with factory labels attached.
B. Cover and protect material in transit and at job site. Damaged or defaced material will be
rejected and shall be replaced at no cost to the Owner.
PART 2 - PRODUCTS
2.1 GENERAL
A. Provide traffic sign with post where shown on the Drawings and as specified.
2.2 MATERIALS
A. Signs: 0.080 aluminum sheet.
B. Posts: Galvanized Steel flanged channels weighing 4 pounds per foot, length as required for
proper mounting height and scheduled foundation embedment depth.
C. Bolts, Nuts, Washers, and Clamps: Cadmium or galvanized steel. Bolts shall be a minimum
of 5/16" in diameter. Clamps shall be two-piece assemblies of at last 14 gage steel or shall be
an adjustable steel strap bracket.
D. Concrete for foundations: 2500 psi minimum, complying with Section 03300.
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION MARCH 2, 2009
SITE SIGNAGE 02007 - 1