Complete Compiled Specification.pdf - Peck Ormsby Construction

1.3 SUBMITTALS:
Neutral to Ground 40,000 amps
Per Phase: 80,000 amps
A. Submit complete and descriptive shop drawings in accordance with the General Conditions,
Division 1, and Section 16050.
B. Submit all related TVSS Specifications and drawing information requested in this document
and U.L. 1449 Second Edition surge suppression ratings for the TVSS. In order for a TVSS
system to be considered, all responses to information requested in this specification must be
provided in writing. If a manufacturer cannot comply with any portion of this specification, this
must be stated in the reply and the reason for non-compliance shall be provided.
C. Submit operation and maintenance data in accordance with the General Conditions, Division
1, and Section 16050.
PART 2 - PRODUCTS
2.1 ACCEPTABLE MANUFACTURERS:
A. Provide products of one of the following manufacturers:
1. Liebert
2. LEA International
3. Current Technologies
4. Advanced Protection Technologies
5. Intermatic Inc.
6. GE Power Quality
7. Cutler Hammer Clipper
8. Square D
9. Siemens
10. EFI
B. Requests for substitution of other products will be considered if submitted in accordance with
the General Conditions, Division 1 and section 16050.
2.2 TVSS EQUIPMENT:
A. The TVSS shall be suitable for application in category C environments as described in
ANSI/IEEE C62.41. The TVSS shall be of parallel design and provide protection from Line to
Ground, Line to Line, Line to Neutral, and Neutral to Ground.
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION March 2, 2009
TRANSIENT VOLTAGE SURGE SUPPRESSORS 16478-2