Complete Compiled Specification.pdf - Peck Ormsby Construction

PART 2 - PRODUCTS
2.01 MANUFACTURERS
Identify each piece or hardware by name. Store materials in dry, protected areas.
A. Available Manufacturers: Subject to compliance with requirements, manufacturers offering
products that may be incorporated in the Work include, but are not limited to the following:
1. Butts and Hinges:
a. Bommer
b. Hager Hinge Co.
c. McKinney
d. Roton
e. Stanley Hardware, Div. Stanley Works
2. Overhead Closers:
b. LCN, Div. Ingersoll-Rand Door Hardware Group
3. Door Trim (Kickplates):
a. McKinney
b. H.B. Ives, A Harrow Company
c. Quality
d. Triangle Brass Manufacturing Company (Trimco)
4. Door Stripping, Seals and Thresholds:
a. National Guard Products, Inc.
b. Pemko
5. Magnetic Hold Open Devices
a. Rixson
B. Approved Manufacturers. Due to the unique requirements of hardware for this project, the
following manufacturers are the only approved manufacturers for the hardware indicated. No
substitutions are allowed.
1. Locksets: Yale
2. Exit Devices: Precision Hardware Inc.
C. Knox Box: Provide Knox-Box 3200 Series Hinged Door, as manufactured by Knox Company,
and as follows:
1. Recessed mount in masonry with hinged door, UL listed tamper switches, !” plate
steel housing, "” thick steel door with interior gasket seal and stainless steel door
hinge. Provide 1/8” thick stainless steel dust cover with tamper seal mounting
capability.
2. Recessed Mount Flange: 7” high by 7” wide.
a. Include manufacturer’s recessed mounting kit.
3. Lock: Double action, UL listed rotating tumblers and hardened steel pins accessed by
a biased cut key.
4. Finish: Knox-Coat proprietary finish.
a. Color: Dark bronze.
2.02 SCHEDULED HARDWARE
A. Requirements for design, grade, function, finish, size, and other distinctive qualities of each
type of finish hardware are indicated in the “Hardware Schedule” at the end of this Section.
B. Manufacturer’s Product Designations: The product designations and name of one
manufacturer are listed for each hardware type required for the purpose of establishing
minimum requirements. Provide either the product designated or, where more than one
manufacturer is specified above, the comparable product of one of the other manufacturers
that complies with requirements.
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION MARCH 2, 2009
FINISH HARDWARE 08700-2