Complete Compiled Specification.pdf - Peck Ormsby Construction

epresentative for approval prior to ordering. Any work done without this approval is done at the contractor's risk.
Charts of all valves shall be furnished to the Owner's representative by the contractor.
A chart to be mounted in a frame with clear glass front, and secured on the wall in the main Mechanical
Equipment Room.
Second chart shall be prepared for use outside of the equipment room, and to be provided with an approved
heavy transparent plastic closure for permanent protection. Two (2) holes to be punched at top of plastic closure
to allow for affixing approximately an 8" length of nickel plated bead chain. Each hole to be reinforced by means
of a small brass or nickel grommet. Plastic closure shall be as manufactured by Seton Name Plate Company,
New Haven, Conn., or approved equal.
Identify all valves. A sample identification shall be as follows:
______________________________________________________________________________________
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDTION March 2, 2009
BASIC MATERIALS & METHODS 15050-22