Complete Compiled Specification.pdf - Peck Ormsby Construction

SECTION 15010 - GENERAL PROVISIONS
PART 1.00 - GENERAL
GENERAL CONDITIONS:
The contractor shall carefully read the General Conditions of the Contract and all information to bidders which,
with the following specifications for heating, cooling, ventilating, plumbing, and temperature control are a part of
the Contract.
BASIC BID:
Shall include all labor and materials specified in this division. The term "furnish" and/or "install" or similar
implication shall mean "furnish and install complete."
SCOPE OF WORK:
The work to be done under this section includes the furnishing of all labor, materials, equipment, controls and
accessories required to complete all air conditioning, plumbing, drainage, and other mechanical systems as
shown on plans and/or described in these specifications, including miscellaneous items required to provide a
complete and functional facility.
Work shall include, but shall not be necessarily limited to, the following:
1. Hot water heating systems
2. Chilled water cooling system
3. Air handling unit air distribution system
4. System commissioning
5. Testing
6. Balancing
7. Insulation systems
8. Air distribution system
9. Automatic control systems
10. Plumbing systems
11 Demolition of existing systems
Unless otherwise noted the mechanical contractor shall provide all miscellaneous electrical work, including
control conduit and wiring (both line voltage and low voltage) for all special systems where the wiring
requirements are either noted on the drawings or provided by the equipment manufacturers or suppliers.
Exception: Where the required wiring is clearly shown on the electrical drawings it shall be provided by the
electrical contractor.
CODES AND ORDINANCES:
All work shall be installed in accordance with the city, state, and local codes, which govern the type of work
_________________________________________________________________________________________
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION March 2, 2009
GENERAL PROVISIONS 15010-1