Complete Compiled Specification.pdf - Peck Ormsby Construction

SECTION 11132 - PROJECTION SCREENS
PART 1 - GENERAL
1.01 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General and
Supplementary Conditions and Division 1 Specification Sections, apply to this
section.
B. Related Sections: Division 6 Section “Rough Carpentry” for blocking in walls.
1.02 SUMMARY
A. This Section includes projection screens of the following type:
1. Manual Projection Screens.
1.03 SUBMITTALS
A. General: Submit the following according to Conditions of the Contract and Division 1
Specification Sections.
B. Product data of standard details and specifications for projection screens
C. Product data of current Camden Manufacturing control switching.
1.04 QUALITY ASSURANCE
A. Screens to be listed by Underwriters' Laboratories and CSA.
1.05 WARRANTY
A. Warranty: Provide manufacturer's written warranty covering defect in materials or
workmanship.
1. Warranty period for ten (10) years.
PART 2 - PRODUCTS
2.01 PROJECTION SCREENS
A. Manual Projection Screen: Shall be Da-Lite, Inc., Model B, Spring Roller Type
Screen, 70" x 70", wall mounting type, "Matte White" viewing surface with black
masking borders standard on flame-retardant and mildew-resistant seamless fabric.
Screen to have a heavy 22-gauge octagonal steel case with flat back design with
baked enamel finish and fitted with end caps concealing roller ends with integral
bearing surface to support roller and integral brackets far wall mounting by means of
slotted screw holes. Provide No. 6, 6" non-adjustable extension brackets for
clearance of markerboard. Bottom of fabric shall be mounted into a metal strip in a
tubular steel slat finished in baked enamel. Ends of slat shall be protected by plastic
caps. Plated steel slat pull shall be attached to slat with screws.
1. Approved manufacturers:
a. Da-Lite Inc
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION MARCH 2, 2009
PROJECTION SCREENS 11132 - 1