Complete Compiled Specification.pdf - Peck Ormsby Construction

SECTION 06100 - ROUGH CARPENTRY
PART 1 - GENERAL
1.01 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and Division-1 Specification sections, apply to this section.
B. Related Sections: Sections specifying work that requires nailers and blocking include, but are
not limited to the following:
1. Division 7 Section “Polyvinyl-Chloride (PVC) Roofing.”
2. Division 10 Section “Solid Phenolic Plastic Toilet Compartments” for partitions and
screens.
3. Division 10 Section “Toilet and Bath Accessories” for grab bars, mirrors, shelves and
owner provided accessories.
1.02 SUMMARY
A. This section includes but is not limited to the following:
1. Wood grounds, nailers, blocking, and plywood backing panels, including backing and
blocking required to support Owner-provided equipment.
B. All wood used for framing and blocking shall be fire-retardant treated. Tested for ASTM E84
and shall have a flame spread not greater that 25.
1.03 SUBMITTALS
A. Wood Treatment Data: Submit chemical treatment manufacturer's instructions for handling,
storing, installation, and finishing of treated material.
B. Preservative Treatment: For each type specified, include certification by treating plant stating
type of preservative solution and pressure process used, net amount of preservative retained,
and conformance with applicable standards.
C. For waterborne treatment, include statement that moisture content of treated materials was
reduced to levels indicated, prior to shipment to project site.
D. Fire-Retardant Treatment: Include certification by treating plant that treated material complies
with specified standard and other requirements. Material shall bear such identification.
E. Material test reports from qualified independent testing laboratory indicating and interpreting
test results relative to compliance of fire-retardant-treated wood products with requirements
indicated.
F. Warranty of chemical treatment manufacturer for each type of treatment.
G. Research reports or evaluation reports of the model code organization acceptable to
authorities having jurisdiction evidencing compliance of the following wood products with
specified requirements and building code in effect for Project.
1. Metal framing anchors.
2. Power driven fasteners.
3. Fire-retardant-treated wood.
SEGP LILY ELEMENTARY SCHOOL CLASSROOM ADDITION MARCH 2, 2009
ROUGH CARPENTRY 06100 - 1