Complete Compiled Specification.pdf - Peck Ormsby Construction

3.16 FINAL OBSERVATION:
A. Contractor shall submit written certification that:
1. Contract Documents have been reviewed.
2. Contractor has inspected Project for compliance with Contract Documents.
3. Work has been completed in accordance with Contract Documents.
4. Equipment and Systems have been tested and are operational.
5. Project is completed and ready for final inspection.
B. Architect will make final inspection as soon as possible after receipt of Certification.
C. Should Architect consider that work is finally complete in accordance with Contract Document
requirements, Contractor shall make Contract Closeout submittals.
D. Should Architect consider that work is not finally complete:
1. He will so notify Contractor, stating reasons.
2. Contractor shall take immediate steps to remedy deficiencies, and send second
written notice to Architect certifying that work is complete.
3. Architect will reinspect work.
E. The Architect will make two final inspections. The first will determine deficiencies and errors
in the work and the second will determine whether or not the noted deficiencies and errors
have been satisfactorily corrected.
F. If additional inspections are required because of the Contractor's failure to complete the
deficiencies and errors prior to the second inspection, costs for the successive inspections
will be back-charged to the Contractor by the Owner, who, in turn, will reimburse the
Architect. Charges will be based as follows:
1. Architect time at current billing rates.
2. Travel time, and all other expenses incurred in making inspections.
G. Contractor to provide one (1) journeyman, tools, meters, instruments and other test
equipment required by Architect. Contractor to remove and replace trims, covers, fixtures,
etc., for Architect to review and test materials, systems, methods and workmanship.
(Example: Removing switchboard and panel covers to take voltage/amp readings, review
connections and wire size, etc.)
END OF SECTION
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION March 2, 2009
BASIC ELECTRICAL MATERIALS AND METHODS 16050-12