10.04.2013 Views

Complete Compiled Specification.pdf - Peck Ormsby Construction

Complete Compiled Specification.pdf - Peck Ormsby Construction

Complete Compiled Specification.pdf - Peck Ormsby Construction

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

c. Gold Bond Building Products Div., National Gypsum Co.<br />

d. United States Gypsum Co.<br />

3. Tile Backer Board:<br />

a. Georgia Pacific Gypsum.<br />

4. Sound Attenuation Batt Insulation:<br />

a. CertainTeed Corporation<br />

b. Johns Manville Corporation<br />

c. Owens Corning<br />

5. Slotted Deflection Track;<br />

a. Brady <strong>Construction</strong> Innovations. Inc.<br />

2.02 WALLBOARD MATERIALS<br />

A. Gypsum wallboard shall conform to ASTM C-36.<br />

B. Provide the following types:<br />

1. At rated construction: 5/8" thick x 4' wide fire resistive gypsum board, Type X.<br />

2. 5/8" thick x 4' wide standard gypsum board.<br />

2.05 FIBERGLASS-MAT FACED GYPSUM BACKING BOARD:<br />

A. Fiberglass-Mat Faced Units: ASTM C1178, Type X and as follows:<br />

1. Thickness: 5/8 inch.<br />

2. Width: 4 feet.<br />

3. Length: 8 feet.<br />

4. Weight: 2600 pounds per thousand square feet.<br />

5. Edges: Square.<br />

6. Surfacing: Coated fiberglass mat on face, back, and long edges.<br />

7. Mold Resistance (ASTM D3273): Not less than 10, in a test as manufactured.<br />

8. Permeance (ASTM E96): Not more than 1.0 perms when tiled.<br />

9. Robinson Floor Test Rating (ASTM C627): Light commercial.<br />

10. Acceptable Products:<br />

a. 5/8 inch DensShield Fireguard Type X<br />

2.03 WALLBOARD ACCESSORIES<br />

A. Trim and edging: 26 gage electrogalvanized steel. Provide angle corner pieces with 1-3/4"<br />

legs at all external corners and U.S.G. No. 200-A metal trim pieces, as detailed, at all<br />

wallboard edges meeting dissimiliar materials and when edges are exposed.<br />

B. Screws: Type S, bugle head, blued steel, of lengths as required to accommodate thicknesses<br />

of wall and ceiling construction.<br />

C. Drywall channel screeds: Fry reglet type DRM-625-75.<br />

D. Laminating Adhesives: As recommended by manufacturer of gypsum board.<br />

2.04 METAL FRAMING<br />

A. Metal Studs: 25 gage unless noted otherwise, electrogalvanized steel, 3-5/8", with dissimilar<br />

flange widths to permit nesting. Provide punch holes at 24" o.c. and 12" from end of studs<br />

capable of passing pipe and conduit and interlocking 1-1/2" reinforcing channel.<br />

1. Provide 20 gage studs at the following locations:<br />

a. Walls over 13 feet high.<br />

SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION MARCH 2, 2009<br />

GYPSUM BOARD ASSEMBLIES 09250-2

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!