Complete Compiled Specification.pdf - Peck Ormsby Construction

SECTION 07600 - FLASHING AND SHEET METAL
PART 1 - GENERAL
1.01 SUMMARY
A. Section includes flashing and sheet metal work shown on the drawings and specified herein.
B. Related Sections:
1. Division 7 Section “Manufactured Roof Panels.”
2. Division 7 Section “Composite Panels.”
3. Division 7 Section “Built-Up Asphalt Roofing.”
4. Division 7 Section “Polyvinyl-Chloride (PVC) Roofing.”
5. Division 7 Section “Joint Sealants.”
1.02 SUBMITTALS
A. Refer to Division 1 Section “Submittals.”
1.03 QUALITY ASSURANCE
A. Verify all dimensions by taking field measurements; proper fit and attachment is required.
B. Coordinate and cooperate with other trades whose work relates to sheet metal in any way.
1.04 DELIVERY AND STORAGE
A. Deliver and store materials in dry, protected areas. Keep free of corrosion or other damage.
Replace damaged materials at no additional cost to the Owner.
1.05 WARRANTY
A. Furnish a written warranty, countersigned by the General Contractor that all sheet metal work
is guaranteed to be watertight and free of defects for a period of 2 years from the date of
substantial completion.
PART 2 - PRODUCTS
2.01 MATERIALS
A. Mild Steel: ASTM A-283.
B. Galvanized Sheet Steel: conforming to ASTM A-525 or ASTM A-446, as required. Where
sheet metal gages are not noted, use 24 gage. Use 20 gage, minimum, for clips or strips.
Exposed pieces to be black.
1. Coping: 22 gage
C. Fasteners: Nails, bolts, and nuts shall be hot-dip galvanized for galvanized steel, aluminum,
copper or bronze for copper.
D. Anchors: For fastening items to concrete or masonry, shall be galvanized machine screws or
bolts, and "Rawl" plug inserts or Phillips "Red Head" concrete anchors, of the size and type
noted or required.
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION MARCH 2, 2009
FLASHING AND SHEET METAL 07600-1