Complete Compiled Specification.pdf - Peck Ormsby Construction

SECTION 07430 - COMPOSITE PANELS
PART 1 – GENERAL
1.01 SUMMARY
A. Section includes: Composite panels, including:
1. High Performance Rout and Return Dry System with PE Core Alucobond !
B. Related Sections: Section(s) related to this section include but are not limited to:
1. Structural Framing: Division 5 Section “Cold-Formed Metal Framing.”
2. Wood Blocking: Division 6 Section “ Rough Carpentry.”
3. Flashing and Sheet Metal: Division 7 Section “Flashing and Sheet Metal.”
4. Sealants (not specified in this section): Division 7 Section “Joint Sealants.”
5. Windows: Division 8 Section “Aluminum Entrances and Storefronts.”
6. Translucent Panels: Division 8 Section “Insulated Translucent Sandwich Panel
Wall/Roof System.
1.02 SYSTEM DESCRIPTION
A. Provide a watertight Rout and Return Dry panel system, as detailed on the drawings. The
panel system must consist of a dry gasket interlocking system. Any panel system utilizing a
continuous field applied joint sealant is unacceptable.
B. The panel system as detailed, shall consist of concealed dry gasketed perimeter extrusions,
extruded stiffeners, gaskets, fasteners and may consist of related flashings (where architectural
drawings indicate they are to be furnished under this specification section), sealants between
jamb panels and previously installed adjacent construction, and other miscellaneous
accessories required for a complete watertight installation. Assembly shall be water and airtight
without reliance on a secondary backup membrane.
1.03 SUBMITTALS
A. Pre-bid submittals:
1. Project Listings: Submit five (5) listings of projects of similar scope and character,
photographs of existing installations. Include the contact names and phone numbers
for the representatives of the Owner, Architect and Contractor for each of the projects.
2. Documents: Demonstrating product compliance with the local building code shall be
submitted prior to the bid. The architect prior to the bid date must approve alternate
materials and wall systems.
3. Substitutions: Any proposed system must comply with the Substitution Section 1.04 B
and submit the following:
a. Prior to bid approval, submit the following ten (10) days prior to the bid date:
(1) Sample: Panel system specifications and 24” x 24” sample fabricated
showing the typical 4-way intersection, with perimeter extrusions and
stiffeners. Samples must be accessible from the backside.
(2) Details: Details and installation instructions showing typical edge
conditions, corners joints, terminations and 4-way intersections.
Details must include sealing instructions.
(3) Test Reports: Independent laboratory test results certifying that the
proposed panel system meets or exceeds all the tests required in this
specification.
b. Submit the following with the bid after the substitution has been approved:
________________________________________________________________________________________
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION MARCH 2, 2009
COMPOSITE PANELS 07430 - 1