Complete Compiled Specification.pdf - Peck Ormsby Construction

The contractor shall remove all stains or grease marks on walls, floors, glass, hardware, fixtures, or elsewhere,
caused by his workman or for which he is responsible. He shall remove all stickers on plumbing fixtures, do all
required patching up and repair all work of others damaged by this division of the work, and leave the premises
in a clean and orderly condition.
INSTRUCTIONS TO OWNER'S REPRESENTATIVES:
The mechanical contractor shall provide, without expense to the Owner, competent instructors to train the
Owner's representatives in the care, adjustment, maintenance, and operation of all parts on the heating, air
conditioning, ventilating, plumbing, fire protection, and automatic temperature control systems and equipment.
Instruction date shall be scheduled at the time of final inspection. A written report specifying times, dates, and
name of personnel instructed shall be forwarded to the Owner's representative.
PROTECTION AGAINST THE ELEMENTS:
The contractor shall, at all times, take reasonable and adequate precautions to protect his work and all stored
materials and equipment from damage by the elements, including flooding, windstorms, etc., and shall not
expose the work of any other contractor to such damage.
In addition to requirements specified in Division 01, stored material shall be readily accessible for inspection by
the Owner's representative until installed.
All items subject to moisture damage, such as controls, shall be stored in dry, heated spaces.
Protect all bearings during installation, and thoroughly grease steel shafts to prevent corrosion.
REMOVAL OF DEBRIS, ETC.:
Upon completion of this division of the work, remove all surplus material and rubbish resulting from the work, and
leave the premises in a clean and orderly condition.
MOTORS & STARTERS:
This contractor shall furnish all motors required and necessary to operate equipment furnished by him. The
voltage, phase, and horsepower of each motor shall be coordinated with the electrical contractor prior to
ordering.
OPENINGS FOR MECHANICAL SYSTEMS:
All openings required for installation of mechanical systems shall be provided by the mechanical contractor. Any
piece of equipment which is to be installed in any space of the building and which is too large to permit access
through stairways, doorways or shafts shall be brought to the job by the Contractor involved and placed in the
space before the enclosing structure is completed. Materials shall be delivered at such stages of the work as will
expedite the work as a whole.
SAFETY REGULATION:
_________________________________________________________________________________________
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION March 2, 2009
GENERAL PROVISIONS 15010-10