Complete Compiled Specification.pdf - Peck Ormsby Construction

installation.
C. All tests shall be performed by an independent certified testing laboratory. All tests shall be in
accordance with ASTM C-67 latest edition.
1.04 DELIVERY AND STORAGE
A. Deliver and store materials in dry, protected areas. Keep free of stain or other damage.
Replace any damaged material at no additional cost to Owner.
PART 2 - PRODUCTS
2.01 APPROVED MASONRY CONTRACTORS
A. The following masonry contractors have been prequalified by the District and are the only
approved subcontractors that will be allowed to bid on this project.
1. Doyle Hatfield Masonry, 801-423-3755, P.O. Box 1217, Salem, Utah
2. Eldredge Masonry, 801-766-0573, 2391 West 780 South, Lehi, Utah
3. Troy Hales Masonry, 801-369-3075, 1429 East 400 North, Spanish Fork, Utah
4. Mcqueen Masonry, 801-282-3331, 4014 Nike Drive, West Jordan, Utah
5. Allens Masonry, 801-444-2821, PO Box 69, Farmington, Utah
6. Harv & Higam Masonry, 801-446-2763, P.O. Box 1137, Draper, Utah
7. Emco Masonry, 801-489-765, P.O. Box 623, Springville, Utah
2.02 BRICK
A. All brick shown on contract documents shall be color, texture as manufactured by:
1. Interstate Brick, 9780 South 5200 West, West Jordan, Utah 84088-5689
2. H.C. Muddox, 4875 Bradshaw Road, Sacramento, CA 95827-9793
3. Gladding, McBean, 601 7 th Street, P.O. Box 97, Lincoln, CA 95648
B. Dimensions: Width x Height x Length.
C. Maximum Saturation Coefficient: 0.78.
D. Minimum IRA: 6 g/30 sq. in.
E. Maximum IRA: 30 g/30 sq. in. Where IRA exceeds 30 g/30 sq. in., pre-wet brick.
F. Hollow Brick: ASTM C-652 latest edition, Grade SW, Type HBX or better.
1. Minimum compressive strength: 6,000 psi.
2. Hollow Brick Types (refer to drawings)
a. Type “1” Field Brick: Atlas Brick 8 x 4 x 16 nominal.
1) Color: Copperstone.
b. Type “2” Accent Brick: Atlas Brick 8 x 4 x 16 nominal
1) Color: Ironstone.
3. Nominal depth (wall thickness) of Atlas Brick is 8-inches except where 6-inch thick
walls are indicated in the drawings.
4. At interior brick walls, provide bullnose corners where vertical external corners
are exposed to view, unless noted otherwise.
G. Accessories
1. Brick Sealer:
a. Interior Masonry Walls: Water based curing and sealing compound, nonyellowing,
ASTM C1315, Type 1, Class A.
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION MARCH 2, 2009
UNIT MASONRY 04200-2