10.04.2013 Views

Complete Compiled Specification.pdf - Peck Ormsby Construction

Complete Compiled Specification.pdf - Peck Ormsby Construction

Complete Compiled Specification.pdf - Peck Ormsby Construction

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

talk, and other impairments. Provide 5-ohm ground at main equipment location. Measure,<br />

record, and report ground resistance.<br />

C. The contractor shall provide all necessary transient protection on the AC power feed and on<br />

all station lines leaving or entering the building.<br />

D. The contractor shall note in his system drawings, the type and location of these protection<br />

devices as well as all wiring information.<br />

E. The contractor shall furnish and install a dedicated, isolated earth ground from. the central<br />

equipment rack and bond to the incoming electrical service ground buss bar.<br />

3.4 FIELD QUALITY CONTROL<br />

A. MANUFACTURER’S FIELD SERVICES:<br />

1. Provide services of a duly factory authorized service representative for this project<br />

location to supervise the field assembly and connection of components and the pretesting,<br />

testing, and adjustment of the system.<br />

B. INSPECTION:<br />

1. Make observations to verify that units and controls are properly labeled, and<br />

interconnecting wires and terminals are identified. Provide a list of final tap settings<br />

of paging speaker line matching transformers.<br />

C. TESTING:<br />

3.5 COMMISSIONING:<br />

1. Rectify deficiencies indicated by tests and completely re-test work affected by such<br />

deficiencies at Contractor's expense. Verify by the system test that the total system<br />

meets the <strong>Specification</strong>s and complies with applicable standards.<br />

A. Train Owner's maintenance personnel in the procedures and schedules involved in operating,<br />

troubleshooting, servicing, and preventative maintenance of the system. Provide a minimum<br />

of ten (10) hours training. O&M’s and Users Guides to be provided at the time of this training.<br />

B. Schedule training with Owner through the Architect, with at least seven days advance notice<br />

3.6 OCCUPANCY ADJUSTMENTS:<br />

A. When requested by the Architect within one year of date of Substantial Completion, provide<br />

on-site assistance in adjusting sound levels, resetting matching transformer taps, and<br />

adjusting controls to suit actual occupied conditions. Provide up to three (3) visits to the site<br />

for this purpose.<br />

3.7 CLEANING AND PROTECTION:<br />

A. Prior to final acceptance, clean system components and protect from damage and<br />

deterioration.<br />

END OF SECTION<br />

SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION March 2, 2009<br />

INTEGRATED ELECTRONIC COMMUNICATION NETWORK 16760-14

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!