Complete Compiled Specification.pdf - Peck Ormsby Construction

SECTION 08200 - WOOD DOORS
PART 1 - GENERAL
1.01 SUMMARY
A. Section includes wood doors shown on the drawings and specified herein.
B. Related Sections:
1. Division 8 Section “Hollow Metal Doors and Frames” for metal frames.
2. Division 8 Section “Finish Hardware.”
3. Division 8 Section “Glass and Glazing.”
1.02 SUBMITTALS
A. Refer to Section 01300.
B. Shop drawings to indicate location and size of each door, elevation of each door type,
construction, fire ratings, and other door conditions specified herein or shown on the
drawings.
1.03 COORDINATION
A. Coordinate work and scheduling of the work of this section with other trades for anchorage
and installation of hardware.
1.04 INSPECTION
A. Examine all subsurfaces to receive work and report, in writing, to the Architect, any conditions
detrimental to work. Failure to observe this injunction constitutes a waiver to any subsequent
claims to the contrary. Commencement of work will be construed as acceptance of all
subsurfaces.
1.05 DELIVERY AND STORAGE
A. Doors shall be stored in an upright position, under cover, and protect from extreme change in
temperature and humidity. Avoid creating a humidity chamber by using a plastic or canvas
shelter and by not venting the area covered. Remove any damaged items from site and
replace at no additional cost to Owner.
B. All doors shall be provided by one manufacturer.
C. Ship materials to job site in separate containers with identified building locations.
1.06 QUALITY STANDARDS:
A. WDMA Industry Standard I.S. 1-A-97 (Window & Door Manufacturers Association).
B. AWI Quality Standards, Latest Edition.
C. ANSI A115. W Series, Wood Door Hardware Standards.
1.07 WARRANTY
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION MARCH 2,2009
WOOD DOORS 08200 - 1