10.04.2013 Views

Complete Compiled Specification.pdf - Peck Ormsby Construction

Complete Compiled Specification.pdf - Peck Ormsby Construction

Complete Compiled Specification.pdf - Peck Ormsby Construction

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

SECTION 10800 - TOILET AND BATH ACCESSORIES<br />

PART 1 - GENERAL<br />

1.01 SUMMARY<br />

A. Section includes toilet room and janitor room accessories as shown on drawings and as<br />

specified herein.<br />

B Drawings and general provisions of the Contract, including General and Supplementary<br />

Conditions and Division-1 <strong>Specification</strong> sections, apply to work of this section.<br />

1.02 DESCRIPTION<br />

A. Toilet accessories required for this work are limited to items specified in this section.<br />

B. Contractor shall provide solid backing and blocking as required for provided items including:<br />

1. Electric Hand Dryers<br />

2. Handicap Grab Bars<br />

3. Mirrors<br />

4. Mop and Broom Holders<br />

C. Owner Finished Contractor Installed Items: The following items will be provided by the Owner<br />

and Installed by the Contractor:<br />

1. Towel Dispensers<br />

2. Soap Dispensers<br />

3. Toilet Paper Dispensers<br />

1.03 RELATED WORK SPECIFIED IN OTHER SECTIONS<br />

A. The following are specified in other sections of these <strong>Specification</strong>s. Cooperate as required<br />

with all other trades to ensure proper and adequate provisions for the installation of toilet<br />

accessories:<br />

1. Backing and Blocking: Division 6 Section “Rough Carpentry.”<br />

2. Toilet Compartments: Division 10 Section “Solid Phenolic Plastic toilet<br />

Compartments.”<br />

1.04 QUALITY ASSURANCE<br />

A. Inserts and Anchorages: Furnish inserts and anchoring devices which must be set in<br />

concrete or built into masonry; coordinate deliver with other work to avoid delay.<br />

B. Accessory Locations: Coordinate accessory locations with other work to avoid interference<br />

and to assure proper operation and servicing of accessory units.<br />

1.05 SUBMITTALS<br />

A. Product Data: Submit manufacturer's technical data and installation instructions for each<br />

toilet accessory.<br />

B. Setting Drawings: Provide setting drawings, templates, instructions, and directions for<br />

installation of anchorage devices and cut-out requirements in other work.<br />

SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION MARCH 2, 2009<br />

TOILET AND BATH ACCESSORIES 10800 - 1

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!